The following video explains how to connect your iPad using IFD100 and or Foreflight with your IFD, please note that this video only applies to IFDs with software 10.3.1.2:
With AviOS10.3, acknowledging CAS messages on IFD100 do not cause the same CAS message to clear on the panel-mounted IFD. Prior to AviOS 10.3, clearing the CAS on IFD100 would cause the same message to clear on the IFD, and vice versa. This is not a bug or a glitch, but rather a circumstance of the new security …
When utilizing the IFD100 iPAD application with an IFD5XX/ 4XX Series navigator it is important to note that the IFD System time will not synchronize on the IFD100 Application. The IFD100 utilizes the time set on the iPAD Device. How does this affect your operation The time shown on your IFD navigator will be G…
To check the enablement's activated on your IFD please use the instructions below. 1. Apply power to the IFD 2. Address the start up pages (Enter/Proceed/Confirm) 3. Press the AUX button 4. Enter the SYS tab 5. On the lower left corner of the screen ensure you are on the STATUS Software page 6. The stat…
Vertical Speed Required or VSR is a programmable data block on the IFD5XX/ 4XX FMS and the IFD100 IPAD Application. With the IFD100 connected to a panel mount IFD via WIFI, there could be certain times where VSR displayed on the panel mounted IFD could be different than the VSR shown in the IFD100 IPAD Applica…
This is an embedded Microsoft Office presentation, powered by Office.
The IFD5XX/4XX Terrain Database Service Bulletin (601-00182-001 Rev.1) will load the terrain data onto your IFD. Please use the link below to get the service bulletin and file needed to complete the process. Please read and understand the service bulletin prior to starting the file load/update. If you have any q…
You're using demo endpoint of Iframely API commercially. Max-width is limited to 320px. Please get your own API key at
Instructions to interface your IFD, iPad, and Stratus 3 in order to get traffic and weather on both the iPad and the IFD from the stratus: First we need to configure the IFD: 1. Insert your USB that you use to update your IFD into the USB port of the IFD. 2. Turn on the IFD. 3. Press the CONFIG tab. 4. Usi…
If you encounter the following error during a Jeppesen Database update please review the information below. Error Detected "Data Load Not Authorized" Photo from actual customer The navigation, obstacle, and charts databases are downloaded from Jeppesen, using the Jeppesen Distribution Manager (JDM), to a USB…