.jpg)
Entegra EX5000 series Online Warranty order processing
How to purchase new or renewal warranty for the Entegra EX5000 Series Primary Flight Display (PFD) and Multi-Function Display (MFD). Warranty renewal is only for pilots whose warranty is about to expire or has lapsed less than 60 calendar days ago. Failure to renew in time will result in the pilot needing to purch…
Entegra EX5000 Series replacement cost for damaged or stolen units
The general rule for the replacement cost for Entegra's damaged beyond economical repair (BER) or stolen Entegra's from a pilot/shop/aircraft is repair cost X 2. (this is Entegra only) Replacements are not guaranteed to be available by Avidyne. Units purchased from salvage companies, eBay, etc., have no warranty.…
MyAvidyne Users Guide
Account Types The MyAvidyne portal includes the following public account types. Primary Customers, OEMs, and Dealers can be created from the registration page, and Umbrella users can be added to other accounts through the Settings tab in the portal. * Primary Customer (also called “Pilot” on the registrati…
NAV Invalid
The Nav Invalid message at the top of the Entegra EXP5000 PFD is associated with the autopilot installed. For up-to-date info on this message, please review the DFC90 Pilot Guide, or applicable (other vendor) Pilot Guide. Below is an excerpt from the DFC90 PG:
Entegra EXP5000 Yellow MSG displayed
***UPDATE*** October 2022 If you have updated the IFDs to 10.3, you may notice the 'MSG' notification on the PFD will no longer show when the IFDs have an advisory notification (cyan/blue messages from the IFDs). The change was due to pilot feedback. Cautions and Warnings will still display the yellow 'MSG' notific…
Entegra EX5000 Screen Delamination
In the photo's below, the shading and bubbles are considered delamination, the separation of the sheets that make up the screen. The unit requires service, and extended warranty is highly recommended. Contact your local avionics shop to start the process for sending the unit in for repair.
Entegra PFD EXP5000 Magnetic Anomaly
When booting the Entegra PFD, if you see the message Magnetic Anomaly, you must move your aircraft away from this interference. If the message continues, after moving the aircraft, seek assistance from an Avidyne Dealer to check the magnetometer, and possibly replace. To find an Avidyne Dealer, go to and click o…
Entegra Condensation
Condensation is something that may occur in the Entegra products, this is due to humidity and temperature. Once the Entegra system is powered on, the heat generated by the Entegra system will clear the condensation. Avidyne does not RMA the Entegra units for condensation, as we do not seal the screens to its hous…
PFD Outside Air Temperature
The outside air temp (OAT) displayed on the PFD (EXP5000) on most aircraft cannot be changed from Celsius to Fahrenheit.
Servo Limit Message on PFD
Generally this means the DFC90 is seeing a problem with the roll servo. The roll servo is the only one that will trigger a "Servo Limit" message. Recommend having an avionics shop perform the Start Up Voltage tests on the roll servo.
