Here are a couple screenshots showing setup and what it will look like if the ADS-B data is properly configured: ![https://hf-files- oregon.s3.amazonaws.com/hdpavidynesupport_kb_attachments/2019/06-10/f8631a1f- 6b16-403b-9d54-c619094d797d/image-20190610120939-1.jpeg][1] Under settings, you can see that only "Av...
It is possible to get Jepp data onto a IFD without the need for a PC. Using a third party device called a **_Bad Elf Wombat_** ($250 on Sporty's) a pilot can use JDM on the ipad and then transfer the data to the BadElf. Plugging a USB into the BE Wombat and then taking that USB to the aircraft and updating the IFD as ...
_**WARNING**_ THIS ONLY APPLIES TO THE MESSAGE BEING DISPLAYED ON THE IFD100 IPAD APPLICATION AND NOT THE PANEL MOUNTED IFD5XX/4XX. IF YOU ARE SEEING THIS MESSAGE ON THE PANEL MOUNTED IFD AS WELL, YOU NEED TO CONTACT AVIDYNE TECHNICAL SUPPORT. It has been reported to Avidyne Technical Support that after upgrading ...
When utilizing the IFD100 iPAD application with an IFD5XX/ 4XX Series navigator it is important to note that the IFD System time will not synchronize on the IFD100 Application. The IFD100 utilizes the time set on the iPAD Device. **How does this affect your operation ** The time shown on your IFD navigator will...
In some installations where a panel mounted IFD5XX/4XX is interfaced with a remote transponder such as an AXP322 the IFD100 IPAD application has been reported to populate a "No Comm With XPDR" CAS message alert. If the message is only present on the IFD100 but not on the Panel Mount IFD5XX/4XX, this is because the ...