.jpg)
Clearing IFD100 CAS Messages Does Not Clear on the IFD with AviOS10.3
With AviOS10.3, acknowledging CAS messages on IFD100 do not cause the same CAS message to clear on the panel-mounted IFD. Prior to AviOS 10.3, clearing the CAS on IFD100 would cause the same message to clear on the IFD, and vice versa. This is not a bug or a glitch, but rather a circumstance of the new security …
Zoom Mode for IFD
Use Zoom Mode to enlarge the font size of Datablocks, LSK labels, and Tabs. To enable, turn Zoom Mode "ON" in AUX-->Setup-->Display page . Click on image for larger depiction.
IFD Not Keeping My Frequencies on Startup with AviOS10.3.0.2
Some IFD owners have reported their active and standby frequencies are different on startup with AviOS10.3.0.2. Some units are defaulting to 118.200 and 132.650, causing pilots to set their frequencies before takeoff. This can be annoying sometimes, especially at an unfamiliar airport. A software change has been ma…
Uploading User Waypoints
Uploading User Waypoints can be done on any IFD running system software version 10.3.X.X or later. The process to complete the upload can be found on page 7-76 in the IFD5XX Pilots Guide and 6-70 in the IFD4XX Pilots Guide. User Waypoints are limited to 500 waypoints.
IFD Password-Protected PIN Set in Maintenance Mode
Maintenance Mode includes a feature to lock your configurations with the use of a Password Protection PIN. This is useful to prevent inadvertent changing of configuration settings while in Maintenance Mode. However, this also means that if one forgets the PIN set, or if a PIN is accidentally set, the PIN must be e…
IFD Default WiFi Password
IFD540 / IFD440 Default WiFi Password IFD Host Network password is abcdef1234 This is customizable, but must be a minimum of 8 characters. In AviOS10.2 or earlier, you may locate the IFD WiFi Password on the Network Configuration Page in Maintenance Mode. Picture Below: (This information can be found in the …
