Condensation is something that may occur in the Entegra products, this is due to humidity and temperature. Once the Entegra system is powered on, the heat generated by the Entegra system will clear the condensation. Avidyne does not RMA the Entegra units for condensation, as we do not seal the screens to its hous…
Pilots with Exceedance messages on the MFD must work with a Piper Distribution Service Administrator (DSA) to remove the Exceedance message(s). Please use the attached DSA file to find the closest DSA, please note: Piper maintains this file and sites may have been moved or closed. Please call before arriving.
Piper - * Malibu, Meridian, Matrix and Seneca V - 4 knob radar capable (Piper PA46, PA34) Release 6: 530-00180-000 * Release 7.0.2: 530-00195-000 Rev02 * Release 8: 530-00195-010 Rev00 * Release 8.1: 530-00201-000 Rev00 * Release 8.1.1: 530-00201-000 Rev01 Release 8.2.2: 530-00235-000 Rev02 * Warrior, …
The Cylinder Head Temperature (CHT) is found on the Engine tab on the MFD. NOTE: not all MFDs will display CHT, this is based on the aircraft type. Please refer to the appropriate Pilot's Guide. For example: The Piper PA28 will show EGT, but not the CHT The Piper PA32 and PA44 will show EGT and CHT
On older versions of the MFD software the AUX tab might not be visible, you will see the Setup tab. It is highly recommended that MFDs with older versions of MFD software be updated to 8.1.1.
Cirrus : TIME,"LAT","LON","E1","E2","E3","E4","E5","E6","C1","C2","C3","C4","C5","C6","OILT","OILP","RPM","OAT","MAP","FF","USED","AMP1","AMP2","AMPB","MBUS","EBUS"
If you are loading Jeppesen Charts and your MFD shows you the message; Not enough space. This is due to the size of the charts you are adding to the MFD. The compact Flash card installed in the MFD is possibly 512MB, and will need to be updated to the 2GB compact flash card. Pilots/owners will need to work with an a…
This is a new message now that January 15, 2020 has passed. It occurs when no charts have been added, and the MFD is programmed for CMAX. This message is only addressing the MFD when charts have never been installed, and the pilot is using a different source (paper, or other device). It is the responsibility of…
For updates to the Terrain information on the Entegra's (EX5000, EX500, etc.) please contact Jeppesen. The terrain update can take upwards of one and a half (1.5) hours, you must have an external power source. If power goes off during the update: The EX500 - your shop will have to call Duncan to have the unit sent …
Refer to the latest pilots guide for the most accurate information regarding Datalink Weather.