2GB USB Drives for the MFD (EX5000/EX500/EX600), you will need to use a PC to format to FAT, not FAT16. The MFD will not understand FAT16. - insert the USB into the PC USB port - Open the USB drive - Right Click on the USB from the file folder on your task bar ![][1] If the above directions cannot be followe...
Remember to look at the description when purchasing USB Drives. The Sandisk/M-Systems joint venture creating the U3 Smart Drive (2nd photo) has the U3 Launchpad executable file installed, which cannot be deleted (1st photo, footnote #1). The MFD can see the executable file, will ignore any/all updates by skipping the u...
The MFD does not have the proper current to charge external devices; such as iPad's or phones. The MFD was created prior to the inception of these external devices. The MFD USB Port is designed for the following: - uploading Jeppesen NavData and Charts - downloading EMAX data Pilots can easily test the port...
New the the Entegra MFD EX5000 (or EX500/EX600)? All inquires for the EX5000 MFD should be directed to Avidyne ([email protected]). All Inquires for the EX500/EX600 should be directed to [Duncan Aviation][1]. What software do I have on my MFD? - take a picture of the AUX tab, If you have a setup tab, this ...
Pilots who notice that the MFD scroll from tab to tab is not working, check for the following: Are the Tabs along the bottom yellow? - if yes, the software card has become corrupt (via the USB port), or the compact flash card (internal) is no longer working correctly. - Avidyne recommends that pilots replace the USB...