DATABASE UPDATES Periodic updates to nav, chart, obstacle, and terrain databases are all made through the USB port on the front of each IFD. Updates must be performed in accordance with 14 CFR Part 43, Appendix A. Note that data updates require the use of Maintenance Mode, which is permitted only on the groun...
2GB USB Drives for the MFD (EX5000/EX500/EX600), you will need to use a PC to format to FAT, not FAT16. The MFD will not understand FAT16. - insert the USB into the PC USB port - Open the USB drive - Right Click on the USB from the file folder on your task bar ![][1] If the above directions cannot be followe...
If you ever need to place an IFD5XX/4XX Series Navigator into maintenance mode you can accomplish by either selecting the Download Logs LSK from the AUX>SYS>Status Software Page or from the AUX>SYS> Status Databases Page (Example Below). ![][1] If the Download Logs or Update Databases selection is not populated (Exam...
Remember to look at the description when purchasing USB Drives. The Sandisk/M-Systems joint venture creating the U3 Smart Drive (2nd photo) has the U3 Launchpad executable file installed, which cannot be deleted (1st photo, footnote #1). The MFD can see the executable file, will ignore any/all updates by skipping the u...
From the Pilots Guide 600-00108-003 Rev01 - www.avidyne.com **EMax Total Engine Management** The EMax™ Total Engine Management is an optional feature that provides the following information about the health of your engines: * Extended Fuel Flow information on the Engine Page and Map Page data blocks. * Initial ...
The MFD does not have the proper current to charge external devices; such as iPad's or phones. The MFD was created prior to the inception of these external devices. The MFD USB Port is designed for the following: - uploading Jeppesen NavData and Charts - downloading EMAX data Pilots can easily test the port...
[https://www.avidyne.com/avidyne?wpdmdl=4303&ind=1553546958722][1] If link does not open, use attached PDF. [1]: https://www.avidyne.com/avidyne?wpdmdl=4303&ind=1553546958722 ...
Instructions on how to format a USB Drive to FAT32. ...
New the the Entegra MFD EX5000 (or EX500/EX600)? All inquires for the EX5000 MFD should be directed to Avidyne ([email protected]). All Inquires for the EX500/EX600 should be directed to [Duncan Aviation][1]. What software do I have on my MFD? - take a picture of the AUX tab, If you have a setup tab, this ...
When updating databases, or any other files to the IFD, you may see this error: ![][1] This is because your USB thumb drive is not properly formatted to FAT32. Avidyne recommends an 8 or 16 GB thumb drive for uploading data to the IFD because they are easily formatted to the proper FAT32 format. Any thumb ...